contacts ：Manager MAO
Telephone ：15666889815
QQ:1950883583
Company Address：The second floor of the first accelerator of the Optoelectronic Industry Park, No. 155 Incubation Second Lane, High tech Zone, Weifang City, Shandong Province
update time ：2025-09-05
Model：WX-ML3
Product Price: Electronic Negotiation
Product brand: Wanxiang Environment
The open channel flow monitoring system integrates sensors, communication, cloud computing and other technologies to achieve real-time perception and intelligent analysis of the water flow status of open channels (such as rivers, irrigation channels, urban drainage networks)
1. Product Introduction
ML3 radar wave point online flow measurement is a fully automatic flow telemetry system that can monitor the flow process in open channels throughout the process. This flow measurement system is not affected by temperature, humidity, rainfall, water depth, turbid water, and floating objects on the water surface, making it very suitable for flow measurement in open channels such as irrigation districts and river channels.
Second, Components
Main components equipment
(1) Radar water level surface flow velocity discharge three-in-one;
(2) Remote Terminal Unit RTU;
(3) Solar power supply system;
(4) Vertical support and bracket;
(5) Lightning protection grounding.
Three, Working Principle
The radar surface flow meter is based on the principle of pulse radar technology to measure the surface flow velocity of river and channel water bodies, and at the same time, it is used in combination with the radar water level sensor, which is installed at the regular section of open channel such as river channels and irrigation districts, to calculate the flow rate, that is, to measure the speed of water flow through the section and at the same time to measure the depth of the water body, and to calculate the flow rate of water flow through the section by mathematical geometric principles.
IV. Characteristics of the flow station
The main characteristics of the radar surface flow measurement system are as follows: it uses a non-contact method to measure flow, mainly consists of a set of radar water level, flow velocity and discharge three-in-one sensor, which is suspended in the air above the channel by a vertical pole support method. By measuring the water level depth and instantaneous surface flow velocity of the regular section, the discharge passing through this section at this moment is calculated. The main characteristics are as follows:
(1) Advantages
Non-contact, can be installed with water, not limited by channel water flow, waterlogging;
No water-blocking phenomenon;
Not easily affected by debris, floating matter in the channel;
Not affected by water quality, suspended sediment content;
Suitable for channels with faster flow rates and larger volumes.
(2) Interference factors
The influence of wind speed: Wind speed can easily cause fluctuations in the water surface, leading to false alarms and mismeasurements;
Slower flow rate: When the water surface flow rate is slower, the measurement error increases;
Sandstorm weather: Sandstorm weather has a significant impact on the signal strength of radar waves, resulting in large measurement errors;
Heavy rain weather: When encountering heavy rain weather, radar waves are easily affected by the intensity of rain, resulting in large measurement errors.
5. Technical parameters
Water level measurement
測(cè)距 range: 0.1-40 meters
Range accuracy: ±5mm
Range resolution: 1mm
Time interval: 1-5000min
Flow rate measurement
Ranging: 0.15～15m/s
Speed measurement accuracy: ±2%
Speed resolution: 0.01m/s
Traffic measurement
Discharge = Average velocity x Cross-sectional area x Correction factor
The average flow velocity is collected by the flow meter on the surface flow of the fluid and calculated by the model.
The cross-sectional area of the overflow is calculated from the water level measured by the water level gauge and the cross-sectional information.
Rainfall monitoring
Measurement range: rain intensity 0～4mm/min
Measurement accuracy: ±0.2mm
Resolution: 0.2mm
Catchment area: φ200mm
Power supply mode: Solar panel + battery combination power supply
Solar power: 100W (optional)
Battery parameters: DC3.7V 10Ah
Support height: vertical rod 3 meters, cross arm 3 meters
Working environment: -45℃～85℃ (no ice state)
Farmland weather workstation - a high standard farmland equipment for data sharing
2024-02-27Portable handheld weather stations can be used for emergency weather management
2025-02-12The 10-layer soil moisture monitor brings reliable soil moisture data
2024-04-16Electronic weather meter - pocket design, easy to carry
2024-12-26Lightning Monitoring and Early Warning System for Oil and Gas Storage - Remote Monitoring of Oil and Gas Storage without Attendance
2023-11-07Multi-functional portable weather observation station: A flexible and versatile tool for weather monitoring
2025-05-16How can chemical explosion-proof automatic weather stations accurately monitor weather changes and risks in chemical industry areas?
2025-03-04Groundwater seepage monitoring station is an effective monitoring equipment to monitor the change of water level and discharge
2024-06-13Gridded air microstations help identify pollution sources and routes
2024-04-01Automatic rainfall monitoring system automatically and accurately monitors rainfall
2024-09-23Product center
Copyright ? 2022 Shandong Wanxiang Environmental Technology Co., Ltd Telephone ：15666889815 address：The second floor of the first accelerator of the Optoelectronic Industry Park, No. 155 Incubation Second Lane, High tech Zone, Weifang City, Shandong Province Filing number：Lu ICP Bei No. 2022000322Website Maptxtmap
Friendly Links：
Home
phone
Product Overview
Contact Us