The electronic level gauge is a kind of digital level measuring equipment based on a variety of sensing technologies (such as pressure sensing, ultrasonic, radar,itive, etc.), which can convert the liquid level height into an electrical signal or digital signal, realizing high-precision and real-time level monitoring
Equipment composition: main unit, water gauge section, acquisition device, power supply system, and vertical pole.
Working principle: Based on the principle of the slight conductivity of water, using advanced processor chips as controllers, the water level data is obtained through the measurement of electrodes, and then transmitted after being digitalized, scaled, sampled, and digitized by the CPU. Then, using wired or wireless communication technology, the water level data is sent to the monitoring center or software, playing the role of real-time monitoring and early warning of the water level.
Power supply mode: Solar power supply, 30W, 20AH
Transmission mode: 2G wireless transmission, optional 4G.
Installation method: wall-mounted
Equipment accuracy 1cm (full range of accuracy)
Resolution: 1cm
Unit section specifications: 80cm
Measure length: 80cm*4
Communication interface: standard RS485, optional 4G, 4-20ma, 0-5v, 0-10v
Parameter configuration: configuration tool to configure specific parameters
Working modes: Air gap mode, Water depth measurement mode, Slope measurement mode
Maximum power consumption: The main unit has a maximum power consumption of 1W, and the water gauge section has a maximum power consumption of 0.05W.
Control card: RS485 is equipped with one relay output by default, which can be arbitrarily associated with alarm items output or used for water level upper and lower limit control.
Installation drilling size: 86.2mm
Mounting hole diameter: 10mm